Materials
• Fabric 35 cm at 140 cm width (makes 3 bibs)
• 1 push button per bib
• Alternatively wet sheet terry 35 cm for midlayer, item no. 250420
1.Stitching with overlock: Cut 1 front and 1 back piece of fabric according to the pattern. Cut e.g. 1 back piece in wet-look terry cloth as a middle layer. 
2.Place the back and front pieces back to back, with the terry cloth in between. You can use pins or clips to hold the layers together. 
3.Sew together with overlock. Start and end at the tip. Add snap button according to marking. 
4.Stitching together on a sewing machine: Cut 1 front and 1 back piece of fabric according to the pattern. Cut e.g. 1 back piece in wet-look terry cloth as a middle layer. 
5.Place the back piece and the front piece right sides together, wet terry cloth is placed behind the back piece. You can use pins or clips to hold the layers together. 
6.Sew together with a 0.5 cm seam allowance. Leave one piece open to turn through. Turn the right side out, press and sew the hole together by hand with small invisible stitches. Add snap button according to marking.
