Prym steam iron mini

Preparation:

Before connecting the iron, check the voltage of the electrical supply. Set the iron's voltage selector to match the voltage of the power source.

1. Place the iron on a heat-resistant surface.

2. Before connecting, fill the water tank using the filling cup. Put the lid on and then connect the iron to the power outlet.

N.B.: It is possible to use tap water. However, if it is too hard, it is recommended to use distilled water to avoid premature wear and achieve good performance.

Use: Set the iron's temperature control to the desired level for the fabric you want to iron:

- Synthetic fibers and delicate materials (low temperature)

- Wool (medium temperature)

- Cotton and linen (high temperature)

When the indicator light on the iron goes off, the soleplate has reached the set temperature, and you can start ironing.

To Steam Iron:

To activate steam, set the temperature control to the desired setting.

- *: steam selector is off - See illustration in the attached manual

- *: steam selector is on - See illustration in the attached manual

To emit steam, press the button on the iron's handle. After use, let the iron cool down. Then empty the water tank and wrap the power cord around the handle and secure it with the hook at the end of the iron.

Filling the Water Tank

1. Disconnect the appliance.

2. Open the plug on the handle and fill the water tank with water using the filling cup.

3. Close the lid and connect the iron to the power source.

Cleaning and Maintenance:

Before performing any maintenance on the appliance, make sure the soleplate has cooled down.

- Clean the iron's soleplate with a dry or slightly damp cloth.

- Never put the iron under running water.

- Do not use sharp objects on the soleplate.

- Clean plastic parts with a damp cloth.

The appliance should only be cleaned with Prym Iron Cleaner (item number: 99293). Do not use abrasive cleaning products that can scratch the surface.

Features

1. Non-stick soleplate

2. Iron temperature indicator light

3. Iron body

4. Ergonomic handle

5. Water tank lid

6. Water tank (40 ml)

7. Steam button

8. Temperature control button

9. Voltage selector 100-240 V

10. Power cord

11. Water filling cup

Technical Specifications

Electrical supply:

- 100-127V/60Hz

- 220-240V/50-60 Hz

Power:

- 260-420/343-408 Watt

Temperature:

- 65-220°C

Iron system:

- steam

Water tank capacity:

- 40 ml

Soleplate surface:

- 135 x 76 x 79 mm

This appliance complies with the requirements of EU directives 2004/108/EC (electromagnetic compatibility) and 2006/95/EC (low voltage directive). The appliance bears the CE marking on the nameplate.