1.Cut about 70 cm of cord. Fold the cord in half and tie a double figure of eight knot about 7 cm from the end. 
2.Attach a snap hook. Then wrap tape tightly around the cord ends and attach a toggle to each end. Tip: Cut the ends obliquely before attaching the toggles. 
3.To secure the toggles, sew through the small holes in the toggles, using strong upholstery thread. Weave in ends. 
4.Cut about 28 cm of webbing. Slide the D-ring onto the webbing. Fold webbing in half. The seam should be about half way along the webbing. Fold the webbing a second time at the stitching line to make a neat seam. Sew with a jeans needle. 
5.Tap an eyelet hole into the webbing about 15 mm from the end - follow the instructions on the eyelet pack. NB: Before tapping the eyelet hole, poke a hole in both layers of webbing with a pointed scissors. You can also mark the spot with a marker. 
6.Insert the snap lock and key chain/key. If necessary, decorate with a patch.
