1.Cut 1 piece of fabric for the back piece 100 cm x 140 c 2.Cut 2 pieces of fabric for the front each 100 cm x 16 cm 3.Cut 5 pieces of fabric for the front piece each 100 cm x 12 cm 4.Cut 6 stripes each 100 cm x 12 cm 5.Cut 1 piece of batting soyamix 140 cm x 100 cm 6.Stitch the pieces for the front piece together with 1 cm seam allowance see drawing, press. 7.Collect the front and back piece with batting soyamix in between, pin the pieces together, safety pins can also be used 8.Make the stitching as shown on the drawing, taking care that the layers do not give way, the easiest way is to stitch the middle of the stripes first followed by stitching along the rug 9.Trim corners round shown on the templet 10.To keep the layers in place make a stitching all the way round the rug with 0.5 cm seam allowance. 11.Stitch the bias band onto the rug, first from the wrong side, start by folding the end 1 cm, afterwards fold the bias band round the edge and stitch it on from the right side. 12.Make 4 tassels and stitch them onto the corners of the rug.
