Materials
255 cm fabric in 140 cm width.
You can also make the basket multicolored
Cushions:
2 pcs 50 x 50 cm (no. 38000050)
2 pcs 80 x 40 cm (no. 38000045)
2 pcs 60 x 35 cm (no. 38000065)
Pssst ... The cushions can easily be removed when the cover needs washing.
1.Cut the fabric as shown in the drawings - 6 pieces of fabric in total. Cut small marking notches on both sides as indicated. Cushion: 1 piece 140 x 80 cm Bottom: 1 piece 80 x 60 cm Side piece 1: 2 pcs 80 x 55 cm Side piece 2: 2 pcs 55 x 60 cm 
2.Overlock/zig zag the sides marked here with a red circle. 
3.Sew the 4 side pieces on the bottom wrong side to wrong side with a 1 cm seam allowance. Press the stitching against the side pieces. 
4.Place the dog bed so that the wrong side of the bottom is facing up. Fold the 4 side pieces at the side markings so that they are right sides together. Sew together on both sides of all 4 pieces. Then turn right side out. 
5.Close the opening on the 4 side pieces. Leave a opening in the middle. Here, the pillow can be put in and taken out again for washing. The seam allowance from the bottom and side piece is sewn into the seam. 
6.Sew the side pieces together two by two on the short edge. Sew it by hand or sew from the inside of the dog bed with a 0.5 cm seam allowance. 
7.Fold the fabric piece for the pillow as shown in the drawings. Sew top and bottom with a 1 cm seam allowance. Turn right side out. Fill the sides and cushion with cushions: Cushion: 2 pcs 50 x 50 cm Side piece 1: 1 pc 80 x 40 cm in each Side piece 2: 1 pc 60 x 35 cm in each
