![DIY: Hobbyhorse Halter and Bridle DIY9028_image.jpg](https://media.selfmade.com/images/diy-hobbyhorse-halter-and-bridle-diy9028-image-jpg.jpg?width=1600&height=2000&i=73902&ud=ai76dosn2gg)
1.Fold all the webbing lengthwise and sew a line of stitching along the entire edge. 2.Fold the 100 cm length of webbing 3 cm around a snap hook at one end. Sew as shown in the illustration. Fold the 70 cm length of webbing 3 cm around a snap hook at both ends. Sew as shown in the illustration. 3.Fold the 28 cm length of webbing and one of the 17 cm lengths of webbing 3 cm around a snap hook at both ends. Sew as shown in the illustration. 4.Fold 2 x 12 cm lengths of webbing 3 cm around the two sets of bands. Sew as shown in the illustration. 5.Fold 2 x 12 cm lengths of webbing 3 cm around the two lower metal rings. Join these two bands to make a one ring. 6.Fold 1 x 17 cm length of webbing 3 cm around the two uppermost metal rings. Fold the other end 3 cm around a snap hook. Sew as shown in the illustration.